EPDM Roofs in Nantwich

Would a single sheet of EPDM put an end to the leaks over your extension?

EPDM installation, replacement and repair on domestic flat roofs in and around the town

CALL US HERE - 01244 740253

GET A FREE ASSESSMENT

An aerial view shows a partially reroofed brick house with new dark gray tiles on one side and old, weathered tiles on left.View from above of a flat, dark gray roof, looking down toward a suburban street with parked cars and apartment buildings.

EPDM takes its name from ethylene propylene diene monomer, the synthetic rubber it is made from, and it arrives on site in large sheets. Its great practical advantage is that a typical domestic roof can often be covered in one piece. With no seams crossing the middle of the roof, the only places water could enter are the edges and the junctions, and that is exactly where our attention goes when we fit EPDM roofs in Nantwich.

A new EPDM roof should give up to 40 years of service for a modest outlay. It is light, it shrugs off sunlight and weather, and the old sheet can go for recycling when its working life is over. None of that counts for much, though, if the edges are poorly detailed or the deck beneath is failing.

This page explains how EPDM suits the town's buildings, how we fit it and what it costs. For an overview of every flat roof system we install, see our flat roofs page for Nantwich.

EPDM Work We Carry Out In Nantwich

New installations

On new extensions and garden rooms, EPDM goes onto a fresh deck with insulation beneath to meet Building Regulations. Because the membrane can be cut to suit, it handles L-shaped extensions and roofs with rooflights without a patchwork of joins. Upstands at the house wall are formed from the same membrane, so the covering runs unbroken from the roof up to the flashing.

Replacing failed felt

Most of our EPDM work replaces worn felt on existing roofs. The old layers come off, the deck is repaired where needed, and the membrane is bonded in their place, often with new trims and a better fall, so the result is a better roof than the original rather than merely a newer one.

Repairs to existing EPDM

A well-fitted EPDM roof rarely fails across its surface. When problems appear they are usually at a lifted edge trim, a puncture from a dropped tool or a poorly sealed pipe, and these can be put right with compatible patches and sealants without replacing the whole sheet. That is usually a short visit.

1,000+ Roofing Projects

Friendly & Reliable Team

EPDM On Older And Newer Nantwich Homes

The town's housing presents two quite different EPDM jobs. In the old centre and the Victorian streets around it, flat roofs are usually small and hemmed in by walls on two or three sides, often old brick with an uneven face and occasionally a timber-framed gable. There the skill lies in forming upstands and flashings that let the membrane and the old wall move independently without opening a gap. It is fiddly work, and it is where cheaper installations most often go wrong.

On the more recent housing in Wistaston, Willaston and Stapeley, the typical job is a garage or kitchen extension roof with straightforward edges but a tired deck, and the focus moves to the boards and the fall. Replacing a soft deck adds a little to the price, but it is the part of the job that decides how long the new roof lasts. Our Nantwich roofing page outlines the other roofing services we provide across the town.

Our EPDM Installation Process

Free survey and quote

We inspect the existing roof, check the deck and drainage, and measure for the membrane. The written estimate sets out the grade of EPDM proposed and, where it is relevant, a choice of specifications with prices for each.

Preparing the deck

The old covering is stripped, the boards checked and replaced as needed, and the fall corrected. Insulation goes on at this stage where required, finished with a smooth deck board for the membrane to bond to.

Bonding and detailing

The membrane is laid out, allowed to relax, and bonded with adhesive, with the perimeter and upstands taped and sealed. EPDM adhesives want dry conditions and reasonable temperatures, so in midwinter we choose our days with care.

Trims and handover

Edge trims and drip details are fitted to carry water into the gutter. You receive photos and video of the finished roof, and our guarantee on the EPDM and on the work of laying it.

What EPDM Offers A Nantwich Property

  • Often one continuous sheet across the roof, with no seams for water to work through.
  • Expected to last up to 40 years, for an outlay that is modest beside many alternatives.
  • Light enough to go onto older extensions and dormers without adding noticeable weight.
  • Unaffected by the long damp spells that wear felt down on Cheshire roofs.
  • Quick to fit on most domestic roofs, so disruption to the household is kept short.
An aerial view of a building with a partially tiled roof, neighboring houses, and a green field under a cloudy sky.A house roof under construction, featuring new dark tiles, partially installed solar panels, and surrounding scaffolding.

How Much Does An EPDM Roof Cost In Nantwich?

Most EPDM roofs we fit start from around £1,500 and usually stay below £4,000. The grade of membrane, the size and shape of the roof, the amount of insulation required and the condition of the deck are the main factors.

On the town's period properties, the cost is often driven by the edges rather than the area. A small roof enclosed by old brick walls may need more upstand detailing and lead flashing than a larger, open garage roof, and so can cost almost as much despite being half the size. That surprises people. It is also where the money is best spent.

EPDM Roofs in Nantwich: Your Questions

Do I need consent from Cheshire East Council to fit EPDM on a listed building?

Very possibly. Changing the covering of a roof on a listed building normally needs listed building consent, even where the roof cannot be seen from the street, because consent relates to the fabric of the building as well as its appearance. On unlisted houses, re-covering an existing flat roof is not usually a planning matter, though Building Regulations come in once over a quarter of the roof area is being renewed.

Can EPDM be fitted during a Cheshire winter?

Yes, with care. The adhesives used to bond the membrane need a dry surface and cure slowly in the cold, so on frosty or wet days we wait. Winter jobs can therefore take a little longer, but the roof ends up properly bonded rather than rushed.

Is EPDM suitable for a flat roof behind a parapet in Nantwich town centre?

It often is, and it suits those roofs well because it can be dressed up the inside of the parapet and into the outlet without many joins. The outlet itself needs attention, as hidden gutters behind parapets block easily and then overflow inside the building. We check and clear it as part of the work.

How does EPDM differ from GRP?

EPDM is a flexible membrane bonded to the deck, while GRP goes on as liquid resin and cures into a hard shell. EPDM generally costs less and copes well with movement; GRP is better for roofs that are walked on regularly. Our rubber roofs page for Nantwich covers the wider family of rubber systems.

How long does an EPDM roof take to fit?

Small domestic roofs can often be completed in a short visit once the deck is sound, which is one reason the system is popular. Larger roofs, or those needing a new deck and insulation, take longer, and the quote includes an expected timescale.

What To Do In Nantwich

EPDM Roofs Elsewhere In Cheshire And North Wales