EPDM Roofs in Ellesmere Port

Planning a kitchen extension and wondering what goes on top?

EPDM flat roof installs, replacements and repairs on Ellesmere Port homes and outbuildings.

CALL US HERE - 01244 740253

GET A FREE ASSESSMENT

An aerial view shows a partially reroofed brick house with new dark gray tiles on one side and old, weathered tiles on left.View from above of a flat, dark gray roof, looking down toward a suburban street with parked cars and apartment buildings.

EPDM roofs in Ellesmere Port are our usual recommendation for a domestic flat roof that has to last. The membrane comes in big sheets, so most garages and single-storey extensions can be covered without a join anywhere. Fewer joins, fewer leaks. That's the whole argument, and it's a good one.

It isn't the answer to everything. If you'll be walking on the roof a lot, GRP is tougher. If price is the only thing that matters, felt is cheaper. For the typical back extension or garage on a semi, EPDM sits right in the middle.

We install, replace and repair EPDM all over Ellesmere Port, Hooton and Little Stanney included. Adding a roof light at the same time? Read our skylights page first, because it's far easier planned in than cut in afterwards.

EPDM Work We Do Around Ellesmere Port

New extension roofs

Deck, insulation, membrane and trims, coordinated with your builder. If the roofer agrees upstand heights and outlet positions before the walls are finished, you avoid a pile of fiddly fixes later. So get us in early. A ten-minute chat at the start beats a day of patching at the end, and it costs you nothing.

Replacing failed felt

The bread-and-butter job on this side of Chester: an old felt roof over a garage or back room, finally past saving. We strip it, sort the deck, insulate if you want it and lay EPDM. Most of the cost is often in the deck repair rather than the membrane, which surprises people the first time.

Repairs to existing EPDM

Punctures, lifted laps and failed upstand details can be patched with compatible EPDM and primer. On a well-laid roof the repair is usually small and quick. If a previous installer used the wrong adhesive or skipped the trims altogether, we'll tell you, and quote both a repair and a proper redo.

1,000+ Roofing Projects

Friendly & Reliable Team

EPDM On Ellesmere Port's Semis And Bungalows

Much of the town's housing went up after the war, as Ellesmere Port grew around the Stanlow refinery and, from 1962, the Vauxhall plant. Semis and bungalows from those decades are now the ones getting extended, and a single-storey rear extension with a flat roof is the classic addition. EPDM is light, so it adds very little load to the structure, and it suits the simple rectangular roof most of these extensions have.

On the Mersey shore, roofs see their share of wind and driven rain. EPDM fully bonded, with the edges trimmed and the upstands taken well up the wall under a flashing, stays put in weather that lifts a lazier job. The membrane itself is rarely the weak point. The detailing is, which is exactly why we spend most of our time on the edges, corners and outlets.

What Happens On An EPDM Job

Free survey and options

We measure up, check the deck and look at how the roof drains. A written estimate follows, which we go through with you, normally with a choice of membrane grade, so you can weigh price against how long you want it to last.

Deck and insulation

Old coverings are stripped and any soft boards replaced. If you're going for a warm roof, insulation boards and a new deck go down at this stage. Falls are corrected if water has been sitting.

Membrane down

The EPDM sheet is rolled out, left to relax, then bonded with the right adhesive for the deck. Upstands, corners and outlets are formed carefully, and edge trims are fixed all round. You get photos at each stage.

Water test and handover

Water goes down the outlets to prove it drains, the site gets cleared, and the guarantees on materials and workmanship are yours. If you have questions about looking after the roof, this is the time to ask them.

Reasons To Use Us For EPDM In Ellesmere Port

  • We'll talk to your builder early, so upstands and outlets suit an EPDM finish.
  • Deck repairs priced at survey instead of sprung on you halfway through.
  • Edge trims and upstand details done with exposure to the estuary in mind.
  • Membrane grades quoted side by side, so you know what extra money actually buys.
  • Repairs as well as new roofs, with a straight opinion on which you need.
An aerial view of a building with a partially tiled roof, neighboring houses, and a green field under a cloudy sky.A house roof under construction, featuring new dark tiles, partially installed solar panels, and surrounding scaffolding.

EPDM Roof Prices In Ellesmere Port

EPDM jobs here start at roughly £1,500 and generally finish below £4,000. Grade and thickness of membrane, the size of the roof, deck repairs and insulation are what take a job from the bottom of that range towards the top.

Some bungalows have long flat-roofed sections across the back, added in stages over the years by different owners. Joining two old roofs of different heights into one EPDM roof takes extra timber work at the step, and we'll price that clearly rather than bury it.

EPDM Roofs in Ellesmere Port: Your Questions

Is planning permission needed for an EPDM extension roof in Ellesmere Port?

The roof covering itself doesn't need permission. The extension might. Many single-storey rear extensions fall within permitted development, but there are limits on depth and height, and listed buildings and conservation areas are stricter. Cheshire West and Chester Council can confirm for your house. A new extension also needs Building Regulations approval either way.

Will heavy rain off the Mersey pool on an EPDM roof?

Only if the roof has no fall. EPDM won't mind standing water the way felt does, but a puddle still collects dirt and keeps the roof wet. We make sure the deck falls towards the outlet, adding firrings where an old garage roof was laid dead flat.

How long does an EPDM roof last?

A new EPDM roof can last up to around 40 years. The membrane is rarely what fails first. Poor upstand details, missing trims and a rotten deck underneath cut roofs short, so those are what we focus on when we fit one.

Can EPDM go straight over my existing felt?

We don't recommend it. EPDM needs a clean, dry, sound deck to bond to. Over old felt you're trapping whatever moisture is already there and gluing your new roof to something that may be rotting. Strip it, check the deck, then lay the EPDM.

Can you fit EPDM in winter?

Yes, within limits. The membrane doesn't mind the cold, but the adhesives need a dry deck and temperatures above a set minimum to bond properly. In a damp Cheshire winter we pick our days and keep the roof covered between stages. It's slower, not impossible.

What To Do In Ellesmere Port

EPDM Roofs Elsewhere In Cheshire And North Wales