Gutter Installation in Wrexham
Do your gutters overflow every time it rains hard?
New guttering and downpipes, sized and fitted to cope with Wrexham's rain.
CALL US HERE - 01244 740253GET A FREE ASSESSMENT


Gutters only get noticed when they go wrong. A drip by the back door. A green stain down the brickwork. Water pouring over the front in a downpour and splashing back up the wall. Gutter installation in Wrexham is mostly about stopping that before it soaks into your walls.
We fit new gutters and downpipes, replace tired systems and repair leaking joints on houses and commercial buildings. You can choose between uPVC, aluminium, cast iron, deepflow and bespoke systems.
Gutters are often where the first sign of a roof problem turns up, such as bits of slate in the hopper or moss washing down off the tiles. If that's what you've got, our roof repairs in Wrexham page will help. For everything else, see our Wrexham page.
Guttering systems for Wrexham houses
uPVC
The everyday choice. Light, cheap and available in several colours, including black, white and brown. It suits most postwar and modern houses. Standard sizes are fine on smaller roofs, but on a big slope we'll often go up a size, because a heavy Wrexham shower can fill a standard half-round faster than it drains.
Cast iron
For Victorian and Edwardian houses, especially in conservation areas, cast iron is often the right replacement. It looks correct, it lasts for generations if it's kept painted, and it's usually what was there originally. It's heavier and dearer, and fitting it properly takes more time and more brackets. Cast aluminium in a cast-iron profile is a lighter alternative.
Deepflow and aluminium
Deepflow gutters carry much more water than standard sections, which is worth having on large roofs and on houses that take the weather head-on. Aluminium can be formed on site in long runs with very few joints, and it won't rust. Both suit bigger or more exposed properties where standard plastic struggles.

1,000+ Roof Repairs
500+ Replacement
Rainwater and Wrexham's brick houses
Wrexham builds in brick, and plenty of its older buildings use the hard red brick and terracotta that the Ruabon area was known for in the 19th century. Good brick takes a lot of weather. What it doesn't like is a constant soaking from an overflowing gutter or a cracked downpipe. The brick gets saturated, frost gets into it and the face starts to flake away. Pointing washes out. Then damp turns up inside.
Rain is the other half of it. Weather off the hills to the west means long wet spells and short bursts of very heavy rain, and gutters that cope with drizzle can't always keep up. On a big roof, or a hillside house at Brymbo or Rhos, the volume coming off can be serious. That's where deepflow sections, extra downpipes and well-placed outlets earn their keep.
How we fit new guttering
Look at the whole roof
We check the existing gutters, the fascias behind them and the roof that drains into them. Rotten fascia boards are better replaced at the same time. You get a free written quote with each material option priced.
Size it properly
We work out how much water each run has to carry, based on roof area and pitch, and pick the gutter size and number of outlets to match. Gutters that are simply too small for the roof are one of the most common faults we come across.
Fit with the right fall
Old gutters come down and new brackets go up, set to a gentle fall towards each outlet. Downpipes are fixed to the wall and connected into the existing drains or soakaway. Joints are sealed as we go.
Test and tidy
We run water through the system to check every joint and outlet, take the old guttering away and send you photos of the finished job. Downpipes get checked at the bottom too, so water actually reaches the drain.
Why choose us for gutters in Wrexham
- Gutters sized for the roof and the rain, not just swapped like for like with whatever failed.
- Cast iron and heritage profiles fitted for period houses and conservation areas.
- Fascias checked at the same time, so new gutters aren't screwed into rotten boards.
- Roofers doing the job, so if the real problem is up on the roof, we'll spot it.
- Every system water-tested before we leave, with a guarantee on materials and workmanship.


What does gutter installation cost in Wrexham?
Budget £600 to £2,000 for a typical gutter job. A small terrace with a single run of uPVC front and back sits at the bottom. A detached house in cast iron, with several downpipes and some awkward corners, sits at the top. Material is the biggest single factor, followed by the length of the runs.
Height and access move the rest. A bungalow can often be done from ladders. A three-storey Victorian house needs a tower or scaffold, which pushes the price up. In conservation areas such as Grosvenor Road or Salisbury Park, cast iron or a matching heritage profile may be the sensible choice on the front elevation, and that costs more than plastic.
Gutter Installation in Wrexham: Your Questions
Do I need permission to change my gutters in Wrexham?
Replacing gutters and downpipes on a house doesn't usually need planning permission. The exceptions are listed buildings, where swapping cast iron for plastic may need listed building consent, and conservation areas covered by Article 4 directions, like Salisbury Park and Fairy Road, where some external changes need permission. If that's you, check with Wrexham County Borough Council's planning team before ordering anything.
My gutters cope with drizzle but overflow in heavy rain. Why?
They're probably too small, or there aren't enough outlets for the size of the roof. A heavy downpour off the hills can put more water into a gutter in a few minutes than it can drain. Deepflow sections or an extra downpipe usually sort it. Check the outlets for blockages first, though. Clearing out moss and leaves is the cheapest fix there is.
What guttering suits an older Wrexham terrace?
Most older brick terraces had cast iron originally, and on the front it still looks the part. If budget is tight, cast-iron-style uPVC is a reasonable compromise outside conservation areas. At the back, standard uPVC is usually fine. We'll suggest a mix if it saves you money without spoiling the front of the house.
How long do new gutters last?
Cast iron, kept painted, can last for generations. Aluminium lasts a long time with very little upkeep. uPVC has the shortest life of the three but still gives years of service, provided the brackets are spaced properly and the gutter isn't sagging under a load of moss and leaves. Whatever you pick, clearing it out once a year helps.
Can you fix a leaking joint instead of replacing everything?
Yes. A leaking joint or a cracked section can usually be replaced on its own. If the whole run is sagging, has lost its fall or keeps leaking at several joints, a new run normally works out cheaper over time. We'll tell you which one we'd do if it were our house.
What To Do In Wrexham

National Trust - Erddig
Learn More about National Trust - Erddig
Xplore! Science Discovery Centre
Learn More about Xplore! Science Discovery Centre
