Gutter Installation in Nantwich
Do your gutters spill down the front of the house every time it rains hard?
New and replacement guttering for period and modern homes, sized to the roof it drains
CALL US HERE - 01244 740253GET A FREE ASSESSMENT


Gutters are easy to overlook because, when they work, nobody notices them. When they fail, the damage goes somewhere less visible: into the brickwork, the timber at the foot of a wall, the joists bearing on it. Gutter installation in Nantwich is therefore as much about protecting the fabric of the house as about the roof, and on the town's older buildings that fabric is often irreplaceable.
We fit uPVC, aluminium, cast iron, deepflow and bespoke systems, and replace or repair existing runs on houses and commercial buildings. The right choice depends on the size of the roof, the age of the building and, in the conservation area, what the house originally had.
If you are unsure whether the fault lies in the gutter or the roof above it, our roof repairs page for Nantwich may help, and our Nantwich page covers the rest of our work in the town.
Gutter Systems We Install In Nantwich
uPVC and deepflow
uPVC is light, economical and available in several colours, and suits most modern houses and extensions. Where a roof is large or steep, a deepflow profile carries considerably more water before it overflows, which can be the difference between a gutter that copes in a downpour and one that pours down the wall.
Cast iron
Cast iron was the standard on Victorian and Georgian houses and remains the correct choice for many listed buildings. It is heavy and costs more, but well maintained it can last for generations, and it looks right on a period frontage in a way plastic rarely manages. It does need painting every few years.
Aluminium and bespoke
Aluminium gives a clean, rust-resistant line that suits contemporary extensions and new builds. Bespoke systems are made to fit unusual rooflines, such as the stepped eaves and irregular frontages found on some of the older buildings in the town centre. They are measured on site and made up to length, so there are fewer joints along the run.

1,000+ Roof Repairs
500+ Replacement
Why Gutters Matter So Much On Nantwich Buildings
A timber-framed building depends on keeping water away from its frame, and especially from the sole plate that rests on the low plinth wall at its base. A leaking gutter, or a blocked downpipe that sends water down a timber-framed wall, can cause decay that is slow to show and expensive to put right. Georgian and Victorian brick suffers too, since constant wetting washes out soft lime mortar and lets frost into the face of the brick.
Some streets near the River Weaver, including parts of Welsh Row and the riverside area, lie within the Environment Agency's flood warning area. Gutters have nothing to do with river levels, of course. But on ground that is already wet, taking roof water properly into the drain, rather than letting it soak in at the foot of the wall, does more to keep a house dry than many owners realise.
How A Gutter Installation Runs
Survey
We look at the roof area each run has to drain, the condition of the fascias and the existing downpipes and drains, and recommend a system and profile. You receive a written and verbal estimate with options at different prices.
Removing the old system
The old gutters and downpipes are taken down and the fascias inspected. Rotten boards are replaced before anything new is fixed, as a gutter is only as secure as the timber it hangs from, however good the gutter itself.
Fitting and falls
Brackets are set to give a steady fall towards each outlet, joints are sealed and downpipes connected to the existing drains. Cast iron joints are bolted and sealed, and the whole system painted to protect it.
Testing
Water is run through the system to prove the fall and the joints. We then clear up and send photographs of the finished installation, along with a guarantee that applies to the guttering and to the fitting of it.
Reasons To Have Gutters Fitted Properly In Nantwich
- Systems sized to the roof they drain, so they keep up with heavy rain instead of overflowing.
- Cast iron fitted where a listed building or a period frontage calls for it.
- Fascias checked and renewed before new gutters go up, so nothing is fixed to rotten timber.
- Water kept off timber frames and soft lime mortar, where damp does the most harm.
- Falls set and tested with water before we leave, not left to be discovered in the next storm.


How Much Does Gutter Installation Cost In Nantwich?
Gutter work generally falls somewhere between £600 and £2,000. A run of uPVC on a small terraced house sits towards the lower end, while a detached house in cast iron or aluminium, with new fascias and several downpipes, sits towards the top. Material, length of run and the height of the building all affect the figure.
Height and access are the main local factors. Many of the older buildings in the town centre rise to three storeys and front directly onto the pavement, so scaffolding or a tower is needed and may have to be arranged with the council. Listed properties needing cast iron cost more as well, both for the material and for the time it takes to fit and paint.
Gutter Installation in Nantwich: Your Questions
Can I replace cast iron gutters with plastic on a listed building?
Not without consent. Cheshire East Council handles listed building consent, and plastic in place of cast iron on a listed building is often refused. On an unlisted house in the conservation area, replacing gutters is normally permitted, though like-for-like cast iron or a good cast aluminium copy usually serves the building better. If you are unsure of a property's status, check the council's records before ordering materials.
Do riverside homes near the Weaver need different guttering?
Not a different gutter as such, but the downpipes and drains deserve more attention. On low-lying ground where the soil stays wet, a downpipe that discharges onto the surface or into a cracked gully adds to the damp at the base of the walls. We check where the water goes once it leaves the downpipe.
Which gutter suits a Victorian terrace in Nantwich?
If the house had cast iron, that is the ideal, and on a terrace of matching houses it keeps the front consistent. Where budget rules out cast iron, a cast-effect aluminium or a good black uPVC half-round or ogee profile is a reasonable compromise at the rear. We would avoid modern square-line plastic on a period frontage.
How often should gutters be cleared?
Once a year suits most houses, ideally after the leaves have come down, and homes near mature trees may need it more often. A gutter that overflows in light rain is usually blocked rather than undersized, and clearing it costs far less than replacing it.
Should the fascias be replaced at the same time?
If they are rotten, yes, because a new gutter fixed to failing timber will soon sag. Sound timber fascias can be repaired and repainted, which suits older houses better than boxing them in with plastic. We look at the fascias during the survey and include them in the quote only if they need it.
What To Do In Nantwich

Nantwich Museum
Learn More about Nantwich Museum
St Mary’s Church, Nantwich
Learn More about St Mary’s Church, Nantwich
