Felt Roofs in Nantwich

Does your garage or outbuilding need a dependable roof without a large bill?

Three-layer torch-on and cold-applied felt systems for garages, extensions and outbuildings

CALL US HERE - 01244 740253

GET A FREE ASSESSMENT

A close-up view of a newly tiled red pitched roof with hip tiles, framed by scaffolding on a cloudy day.Exterior view of a dormer window with white horizontal siding and a white trim frame set against a dark tiled roof.

Felt has a poor reputation, mostly earned by the single-layer sheet that was nailed onto garages for decades and lasted about as long as one might expect. Modern felt is built differently. A three-layer torch-on system, each layer bonded to the one beneath, gives a hard-wearing roof for less than rubber or fibreglass, and it is why felt roofs in Nantwich remain a sensible choice for garages, sheds and many extensions.

It is also a material to be handled with some thought in a town like this one. Torch-on felt is laid with a gas flame, and in a historic town of timber-framed buildings, some standing close together, there are roofs where an open flame should not be used at all.

Below are the felt systems we fit, how we decide between them and the likely costs. For a comparison with other materials, see our flat roofs page for Nantwich.

Felt Systems For Nantwich Roofs

Three-layer torch-on

A base sheet, an underlay and a mineral-finished cap sheet, each bonded with heat to form one thick waterproof layer. It is our usual recommendation for detached garages, outbuildings and extensions where there is good clearance from neighbouring timber, eaves or anything else that could catch. Laid on a sound deck, it gives years of trouble-free service.

Self-adhesive felt

Cold-applied felt bonds without a flame, which makes it the right choice next to timber-framed walls, under overhanging eaves or anywhere a torch would be unwise. It suits smaller roofs well and is built up in layers in much the same way as torch-on. It costs slightly more but removes the fire risk.

Modified bitumen felts

SBS-modified felt stays flexible in cold weather and resists cracking, which helps on roofs that see hard frosts. APP-modified felt stands up better to strong sunlight and suits south-facing roofs with little shade. We choose between them according to how the roof is exposed, and either can serve as the cap sheet of a three-layer system.

Felt Roofing In A Historic Town Like Nantwich

Most of Nantwich east of the River Weaver burned in December 1583, and the town rebuilt afterwards on the old street plan is the one that survives through much of the centre today. It would be an odd sort of carelessness to bring a gas torch close to those buildings without good reason. Where a flat roof adjoins a timber-framed wall, sits beneath old eaves or abuts a listed neighbour, we use self-adhesive felt or recommend a cold-applied system such as rubber instead.

Further out the picture is simpler. Garages in Wistaston and Willaston, and the sheds, stores and workshops on rural properties around Reaseheath, are just the kind of roof torch-on felt was made for, and on roofs like those the lower cost usually wins out. Our Nantwich page covers the full range of roofing work we carry out in and around the town.

How We Lay A Felt Roof

Survey and safety check

Beyond the usual look at the deck, falls and drainage, we assess whether a flame can be used safely on the roof at all. That decision shapes the quote, which comes in writing with the options explained.

Strip and repair

The old felt is removed back to the deck and any soft or rotten boards are replaced. On garages this is often where the real problem lies, since years of small leaks will have weakened the timber.

Laying the layers

Each layer is laid and bonded in turn, with laps staggered so that no joint sits directly over another. Edges, upstands and outlets are finished carefully, and after any torch-on work the roof is checked for heat or smouldering before we leave site.

Final check and guarantee

We inspect the finished roof, edges and outlets included, take away the waste and send photographs of the completed work. The felt and our workmanship are then both covered by the guarantee you receive at handover.

Why Felt Still Makes Sense For Many Nantwich Roofs

  • The most affordable flat roof covering, and a sound one when it is laid in three layers.
  • Quick to install, so a garage or outbuilding is out of use for very little time.
  • Easy to patch if damaged, which keeps maintenance costs low over the life of the roof.
  • Flame-free options for roofs that sit close to timber framing or older eaves.
  • A choice of SBS or APP felt to suit roofs that face hard frost or strong sun.
A house under renovation with scaffolding on the roof, featuring a brick conservatory, set against a clear blue sky.A brick house undergoing renovation with scaffolding surrounding the roof and front under a clear blue sky.

How Much Does A Felt Roof Cost In Nantwich?

Most felt roofs we install cost between around £1,200 and £3,000, depending on the size of the roof, the system chosen and how much of the deck needs replacing. Self-adhesive and modified felts cost a little more than standard torch-on, and new insulation adds to the price where Building Regulations call for it.

On older properties in the town centre, choosing a cold-applied system for safety reasons can raise the cost slightly. Rural outbuildings, by contrast, are often larger but simpler, with good access from a yard, which keeps the cost per square metre lower than on a small, hemmed-in town roof.

Felt Roofs in Nantwich: Your Questions

Is permission needed to re-felt a roof in the conservation area?

Re-covering an existing flat roof in felt does not usually need planning permission, even within the conservation area. If the building is listed, speak to Cheshire East Council before work starts, as a change in roofing material can need listed building consent. Renewing more than a quarter of a roof's area also brings Building Regulations into play.

Is torch-on felt safe near old timber-framed buildings?

Only with care, and on some roofs not at all. The flame can ignite dry timber, old felt or debris hidden under eaves, and in a terrace the risk reaches neighbouring properties too. Where we have any doubt we use a self-adhesive felt or a cold-applied membrane instead, which removes the risk entirely.

How long will a new felt roof last on a garage in Nantwich?

A three-layer torch-on roof, properly laid on a sound deck, lasts many times longer than the old single-layer felt it usually replaces. Exactly how long depends on exposure, drainage and upkeep. A roof that sheds water freely and has the odd build-up of moss cleared will far outlive one left ponding.

Should I choose felt or rubber?

Felt costs less and is easy to repair, so it suits garages, sheds and roofs where budget comes first. Rubber costs more but asks for less attention over a longer life. Our rubber roofs page for Nantwich sets out that system if you would like to compare the two.

Why is my felt roof blistering?

Blisters form when moisture or air trapped beneath the felt expands in warm weather. A few small ones are not always urgent, but blisters that crack will let water in. Widespread blistering usually points to a damp deck, and re-covering without dealing with the deck would only repeat the problem.

What To Do In Nantwich

Felt Roofs Elsewhere In Cheshire And North Wales